This menu is used to display the number of stations and MAC addresses. If the sleep mode is enabled, then the user needs to set “Sleep Time”, that is, if the Wi-Fi network has no any connections from terminals during the “Sleep Time”, then the Wi-Fi module of uFi will sleep. This menu is used to enable or disable sleep mode of Wi-Fi module.
Note: The security settings will be effective after rebooting the uFi device. This menu is used to set password of Wi-Fi network. Note: The profiles settings will be effective after rebooting the uFi device. If the “SSID Broadcast” is set as “Disable”, then when terminals search for Wi-Fi networks, this SSID will not show on the list of Wi-Fi networks, and the user need to add this SSID manually. Users can define Wi-Fi network name (SSID) for easy memory and recognition. This menu is used to set Wi-Fi “Network Mode”, “Network Name (SSID)”, “SSID Broadcast”, “Frequency (Channel)”, “Max Station Number”. If users don’t know how to set these parameters, please confirm with your local network provider. This menu is used to set 3G network access parameters, including network provider, “Dial Number”, “Username”, “Password”, “APN”. This menu is used to set the priority of networks. This menu is used to set connection mode to 3G network.įor “Manual Dial-up” mode, connecting and disconnecting to 3G network can be operated on “Home->Network Connect” menu. The default login account and password both are “admin”. This menu is used to modify the login password of administration page. Note: The DHCP settings will be effective after rebooting the uFi device. “DHCP IP Pool” is used to set the IP address range which is allocated dynamically to each terminal connected to Wi-Fi network. The default value of IP address is “192.168.100.1”. This IP address is also the website of the administration page. “IP address” is used to set the IP address of uFi device. “Reset Factory” button is used to restore all the factory settings and restart the uFi device. “Wireless Network” displays the number of stations and MAC addresses.
“Refresh” button is used to refresh the display of data flux and connected time.Ģ. If the menu “3G->connection mode” is set as “Automatic dial-up”, and the user disconnects 3G connection manually by click “Disconnect” button, then the uFi device will connect 3G network automatically. When 3G network is connected, this button will switch to “Disconnect”. “Connect” button is used for 3G connection manually. Data flux and connected time will be displayed on the left frame. Check your sim card operator first before order thanksġ.
0 kommentar(er)
